FL-NCDABC

Ladda ner som PDF

NCDA Boot Camp

Course Objectives

By the end of this course you should be able to:

  • Identify the various components of a NetApp storage environment
  • Install and perform the setup configuration of Data ONTAP
  • Perform basic administration on a storage system
  • Explain and configure physical and logical storage
  • Identify and configure client protocols
  • State virtualization techniques available in Data ONTAP
  • Describe Snapshot copies and space consumption in Data ONTAP
  • Discuss backup methods available in Data ONTAP
  • Configure and administer client-server relationships in NFS environments
  • Configure, administer, and troubleshoot storage systems in CIFS environments
  • Collect and analyze performance data to assist with troubleshooting storage system hardware, operating systems, network connections, NFS configuration files, and options
  • Define the components of a SAN environment and explain how LUNs relate to the storage system
  • Describe the Fibre Channel (FC) and iSCSI SAN multipathing options for Windows and Linux-based operating systems
  • List the storage-system and data availability methods
  • Configure and administer SnapRestore®, asynchronous and synchronous SnapMirror®, MetroCluster™, SnapVault®, and Open Systems SnapVault technologies

Målgrupp

Network Professionals seeking the NetApp Certified Data Management Administrator (NCDA) certification. 

This course is also valuable for those who need to perform in-depth support, administrative functions, and performance management for environments using any of the following enterprise storage solutions: CIFS, NFS, FCP, iSCSI protocols on a NetApp storage appliance running the Data ONTAP 8.1 operating system.

Förkunskaper

Introduction to NetApp Products Web Based Training

Certifieringsförberedande

This course is part of the following Certifications:

Course Content

This 10-day boot camp will prepare you for the NetApp Certified Data Management Administrator (NCDA) Data ONTAP 7-Mode exam # NSO-155. Through lectures and labs, you will learn about the features and functions of the NetApp® Data ONTAP® 7-Mode operating system and about network-attached storage (NAS) administration and SAN configuration.

Detailed Course Outline

Data ONTAP 7-Mode Administration (D7ADM)

Module 1 The NetApp Storage Environment
  • Identify the key features and functions of NetApp storage systems
  • Describe the advantages that a NetApp storage system provides
  • Distinguish between network-attached storage (NAS) and SAN topologies
  • Describe NetApp Unified Storage Architecture
  • Access the NetApp Support site to obtain software and hardware documentation
Module 2 WAFL Simplified
  • Describe how data is written to and read from WAFL (Write Anywhere File Layout) file system on a volume
  • Explain the WAFL file system concepts, including consistency points (CPs), RAID management, and storage levels
  • Describe how RAID is used to protect disk data
  • Explain how the WAFL file system processes write and read requests
Module 3 Basic Administration
  • Connect remotely to a FAS system by using the console and a remote host
  • Access NetApp System Manager to administrator a storage system
  • Execute commands by using the console, a remote host and... Läs mer

Course Content

This 10-day boot camp will prepare you for the NetApp Certified Data Management Administrator (NCDA) Data ONTAP 7-Mode exam # NSO-155. Through lectures and labs, you will learn about the features and functions of the NetApp® Data ONTAP® 7-Mode operating system and about network-attached storage (NAS) administration and SAN configuration.

Detailed Course Outline

Data ONTAP 7-Mode Administration (D7ADM)

Module 1 The NetApp Storage Environment
  • Identify the key features and functions of NetApp storage systems
  • Describe the advantages that a NetApp storage system provides
  • Distinguish between network-attached storage (NAS) and SAN topologies
  • Describe NetApp Unified Storage Architecture
  • Access the NetApp Support site to obtain software and hardware documentation
Module 2 WAFL Simplified
  • Describe how data is written to and read from WAFL (Write Anywhere File Layout) file system on a volume
  • Explain the WAFL file system concepts, including consistency points (CPs), RAID management, and storage levels
  • Describe how RAID is used to protect disk data
  • Explain how the WAFL file system processes write and read requests
Module 3 Basic Administration
  • Connect remotely to a FAS system by using the console and a remote host
  • Access NetApp System Manager to administrator a storage system
  • Execute commands by using the console, a remote host and NetApp System Manager
  • Use commands to analyze a FAS system
  • Configure and manage the NetApp AutoSupport tool for a FAS system
Module 4 Physical Storage
  • Describe Data ONTAP RAID technology
  • Identify a disk in a disk shelf based on its ID
  • Execute commands to determine a disk ID
  • Identify a hot-spark disk in a FAS system
  • Describe the effects of using multiple disk types
  • Create a 32-bit aggregate and a 64-bit aggregate
  • Execute aggregate commands in the Data ONTAP operating system
  • Calculate usable disk space
Module 5 Logical Storage
  • Explain the concepts related to volumes in the Data ONTAP operating system
  • Define and create a flexible volume
  • Execute vol commands
  • Define and create qtrees
Module 6 Administration Security
  • Restrict administrative access
  • Restrict console and NetApp System Manager access
  • Configure a client machine as an administration host to manage a storage system
Module 7 Networking
  • Identify the configuration of network settings and components in the Data ONTAP operating system
  • Explain and configure name resolution services
  • Configure routing tables in the Data ONTAP operating system
  • Define and create interface groups
  • Discuss the operation of virtual LANs (VLANs) and how to route them
Module 8 NFS
  • Explain NFS implementation in the Data ONTAP operating system
  • License NFS on a storage system
  • Explain the purpose and format of /etc/ exports
  • List and define the export specification options
  • Describe the use of the exportfs command
  • Mount an export on a UNIX host
Module 9 CIFS
  • Describe the CIFS environment
  • Configure the storage system to participate in the CIFS environment
  • Share a resource on the storage system
  • Map a drive from a client to the shared resource on the storage system
Module 10 NAS Management
  • List some security methods for protecting data
  • Explain and configure a security style setting for a volume and a qtree
  • Describe methods of tracking and restricting storage usage
  • Explain, create, and manage quotas
  • Explain and configure the Data ONTAP FPolicy file-screening policy
Module 11 SAN
  • Explain the purpose of a SAN
  • Identify supported SAN configurations
  • Distinguish between Fibre Channel (FC), Fibre Channel over Ethernet (FCoE) and iSCSI protocols
  • Define a LUN and explain LUN attributes
  • Use the LUN setup command and NetApp System Manager to create iSCSI-attached LUNs
  • Access and manage a LUN from a Windows host
  • Define SnapDrive data management software and its feature
Module 12 Snapshot Copies
  • Describe the function of Snapshot copies
  • Explain the benefits of Snapshot copies
  • Identify and execute Snapshot commands
  • Create and delete Snapshot copies
  • Configure and modify Snapshot options
  • Explain the importance of the .snapshot directory
  • Describe how Snapshot technology allocates disk space for volumes and aggregates
  • Schedule Snapshot copies
  • Configure and manage the Snapshot copy reserve
Module 13 Space Management
  • List the storage efficiency techniques that are available within the Data ONTAP operating system
  • Identify the factors that impact space consumption in the Data ONTAP operating system
  • Describe how and when a volume consumes space from the aggregate that contains it
  • Explain how to guarantee writes for a file
  • Explain how the Data ONTAP operating system can provide space to a full volume
  • Identify the deduplication and compression techniques that are available in the Data ONTAP operating system
Module 14 High-Availability
  • Describe high-availability (HA) solutions
  • Discuss how HA increases the reliability of storage
  • Define HA controller configuration
  • Describe the three modes of HA operation with an HA pair
  • Analyze how HA affects clients protocols during failover and giveback operations
Module 15 Virtualization Solutions
  • Describe how to virtualize a storage controller by using MultiStore software
  • Configure MultiStore software
  • Assign client protocols on MultiStore software
Module 16 Backup and Recovery Methods
  • List the methods available to back up and recover data
  • Use ndmpcopy to process full and incremental data transfers
  • Discuss dump and restore
  • Describe, enable, and configure Network Data Management Protocol (NDMP) on a storage system
Module 17 Data Collection Tools
  • Use the sysstat, stats, and statit commands
  • Describe the factors that affect RAID performance
  • Execute commands to collect data about write and read throughputs
  • Execute commands to verify the operation of hardware, software, and network components
  • Identify commands and options that are used to obtain configuration and status
Module 18 Data ONTAP Upgrades
  • Access the NetApp Support site for the following documents:
    • Data ONTAP Upgrade Guide
    • Data ONTAP Release Notes
  • Use a configuration worksheet to collect data for installation
  • Describe how to perform Data ONTAP software upgrades and reboots
  • Use the setup command to configure a storage system
Lab Exercises

Lab 1-1 Identify the exercise environment
Lab 1-2 Explore the NetApp support site
Lab 2-1 Explain how the Data ONTAP operating system writes data
Lab 2-2 Explain how the Data ONTAP operating system reads data
Lab 3-1 Log in to the exercise environment
Lab 3-2 Install System Manager
Lab 3-3 Add a storage system to NetApp System Manager
Lab 3-4 Use the CLI to access a storage system
Lab 3-5 Explore the Help command and privilege levels
Lab 3-6 List the options on a storage system
Lab 3-7 From the CLI, examine the system configuration of a storage system
Lab 3-8 Use NetApp System Manager to configure DNS
Lab 3-9 Use system manager to configure the AutoSupport tool
Lab 4-1 Exploring the current disk configuration
Lab 4-2 Understand the impact of disk scrub on a storage system
Lab 4-3 Run the storage configuration wizard
Lab 4-4 Use NetApp system manager to create a 64-bit aggregate
Lab 4-5 Use the CLI to create a 64-bit aggregate
Lab 4-6 Use the CLI to create a 32-bit aggregate and upgrade to 64-bit
Lab 4-7 Cause a disk to fail
Lab 4-8 Add disks to an aggregate
Lab 5-1 Use system manager to create a volume
Lab 5-2 Resize a volume
Lab 5-3 Delete a volume
Lab 5-4 Create qtrees
Lab 5-5 Delete qtrees
Lab 6-1 Create an administrative user account
Lab 6-2 Use the CLI to configure administrative security
Lab 6-3 Log in with a new user account
Lab 7-1 Use the System Manager to configure network settings
Lab 7-2 Use the CLI to configuration network settings
Lab 7-3 Use the CLI to create a single-mode interface group
Lab 7-4 Use the CLI to create a multimode interface group
Lab 8-1 Use NetApp System Manager to license NFS
Lab 8-2 Use NetApp System Manager to export a volume
Lab 8-3 Use the CLI to export a volume
Lab 8-4 Mount exports from an administration host
Lab 9-1 Use NetApp System Manager to license CIFS service
Lab 9-2 Use NetApp System Manager to configure CIFS service
Lab 9-3 Create a window domain user
Lab 9-4 Use the CLI and NetApp System Manager to view and create shares
Lab 9-5 Create a new share with computer management
Lab 9-6 Map shares to drive letters
Lab 9-7 Modify user permissions
Lab 9-8 Display CIFS sessions
Lab 9-9 Configure SMB 2.0 protocol
Lab 9-10 Terminate CIFS sessions
Lab 10-1 Create and manage quotas
Lab 10-2 Create a quota report
Lab 10-3 Modify the /etc/quotas file and implement quota changes
Lab 10-4 Use the CLI to create qtrees and quotas for the qtrees
Lab 10-5 Create a native file-blocking policy
Lab 11-1 License and start the iSCSI service
Lab 11-2 Configure iSCSI on Windows Server 2008 R2
Lab 11-3 Use NetApp System Manager to create a LUN
Lab 11-4 Use the CLI to create a LUN
Lab 11-5 Access LUNs from Windows Server 2008 R2
Lab 11-6 Nondistributively move a volume that contains a LUN
Lab 12-1 Use NetApp system manager to create a SnapShot copy
Lab 12-2 Restore a windows file from a SnapShot copy
Lab 12-3 Restore a Linux file from a SnapShot copy
Lab 12-4 Use NetApp system manager to manage SnapShot copies
Lab 12-5 Restore a file by using the windows previous version tool
Lab 12-6 License and configure SnapRestore technology
Lab 12-7 Revert a volume using SnapRestore technology to restore a volume
Lab 12-8 Use SnapRestore technology to restore a file
Lab 13-1 Explore volume space consumption
Lab 13-2 Explore file space consumption
Lab 13-3 Configure deduplication
Lab 15-1 Create two MultiStore systems with separate IP aliases
Lab 15-2 Create a CIFS share on a MultiStore system
Lab 15-3 Create an iSCSI LUN on a MultiStore system
Lab 16-1 Copy a volume by using the NDMPCOPY command
Lab 17-1 Identify the commands that you can use to troubleshoot and solve problems
Lab 17-2 Run the statit command on a storage system
Lab 17-3 Run the stats command on a storage system

Accelerated NCDA Boot Camp Data ONTAP 7-Mode (ANCDABC87)

Module 1 NCDA Overview
  • Identify the skills and knowledge that NetApp Certified Data Management Administrator (NCDA) certification verifies and the benefits that certification provide
  • Explain key concepts from the Data ONTAP 7-Mode Administration course
Module 2 NFS Overview
  • Define NFS
  • Differentiate between NFS protocol versions
  • Recognize the differences between stateless and stateful protocols
  • Describe how the storage system acts as an NFS file server
  • List the requirements of NFS
Module 3 NFS Setup
  • Configure NFS on a NetApp® storage system
  • Add Network Information Server (NIS) to manage users, groups, and name-to-IP resolution
  • Configure a storage system to perform hostname (Domain Name System or DNS) look ups
  • Configure a storage system to access a Lightweight Directory Access Protocol (LDAP) server, in order to centrally manage users and groups
  • Configure PC-NFS and WebNFS environments to extend the reach of NFS
Module 4 Exports and Mounts
  • Identify exportable resources
  • Export and unexport resources to clients, subnets, and netgroups
  • Manage a storage system with the exportfs command
  • Create mountpoints and mount exported resources on a client
  • Monitor the usage of exported resources
  • Discuss a nondisruptive migration technique
Module 5 CIFS Overview
  • Describe basic CIFS features
  • Describe the following network environments:
    • Microsoft® Windows® workgroup
    • Non-Windows workgroup
    • Windows domains
  • Describe how a storage system authenticates users in each server environment
  • Explain the advantages and disadvantages of each server environment
Module 6 CIFS Workgroups
  • License CIFS on a storage system
  • Join a storage system to a Microsoft® Windows® workgroup environment using the CIFS setup command
  • Review the results of CIFS setup
  • Manage newly created configuration files for a CIFS workgroup environment
Module 7 CIFS Shares and Sessions
  • Display all shares that are available on the storage system
  • List the default shares
  • Configure a client machine to access any share
  • Identify the CIFS sessions that have been established by accessing a share on the storage system
  • Add, modify, and delete shares
Module 8 CIFS Access Control
  • Create and manage local users for a storage system
  • Identify how to create a local group and make a local user a member of that group
  • Use the command-line interface, NetApp® System Manager, and Microsoft® tools to add, delete, and modify access permissions for shares
  • Use Microsoft tools to add, delete, and modify access per missions for files and folders
Module 9 CIFS Domains
  • Terminate the CIFS service to prepare for CIFS domain configuration
  • Reconfigure the CIFS service for a Windows® domain
  • Identify the resulting files
  • Create domain users and add the domain users to a local storage system group
  • Configure preferred domain controllers (DCs)
Module 10 NAS Multiprotocol
  • Determine and verify user mappings for CIFS users that are accessing UNIX® volumes and qtrees and mixed volumes and qtrees
  • Determine and verify user mappings for UNIX users that are accessing New Technology File System (NTFS) volumes and qtrees and mixed volumes and qtrees
Module 11 NAS Troubleshooting
  • Locate options and configuration files that might be misconfigured on the storage system
  • Test for Domain Name System (DNS) resolution on both they storage system and the client
  • Use client-side tools to test the client configuration
  • Use storage system and client tools to isolate network system blockages
  • Recognize typical error messages and list the commands that you can use to identify the sources of the error messages
Module 12 SAN Overview
  • Describe the differences between network-attached storage (NAS) and storage area network (SAN)
  • List the methods that you can use to implement a SAN environment
  • Define a LUN, initiator, and target
  • Describe ports, worldwide node names (WWNNs), and worldwide port names (WWPNs)
  • List the basic steps required to implement a SAN
Module 13 FC Connectivity
  • Describe how to implement multiple paths with Fibre Channel (FC) connectivity
  • Describe hot to configure FC ports on Windows®, Red Hat®, and NetApp® systems
  • Describe the commands and utilities that you can use to identify worldwide node names (WWNNs) and worldwide port names (WWPNs) on Windows®, Red Hat®, and NetApp® systems
Module 14 iSCSI Connectivity
  • Describe multiple path implementation with iSCSI connectivity
  • Configure network ports on Windows®, Red Hat®, and NetApp® systems
  • Identify the worldwide node name (WWNN) on Windows, Red Hat, and NetApp systems
  • Configure and verify multiple-path iSCSI connectivity between Windows, Red Hat, and NetApp systems
Module 15 LUN Access
  • Describe the steps that you must complete to allow a Windows® Server 2008 R2 initiator to access a LUN on a storage system
  • Describe the steps that you must complete to allow a Red Hat® initiator to access a LUN on a storage system
Module 16 Availability Overview
  • List the methods that you can use to back up and recover data for data availability
  • Describe the methods that you can use to ensure system availability
Module 17 Snapshot Copies
  • Describe the function of Snapshot® copies
  • Explain the benefits of Snapshot copies
  • Identify and execute Snapshot commands
  • Create and delete Snapshot copies
  • Configure and modify Snapshot options
  • Explain the importance of the .snapshot and ~snapshot directory
  • Describe how disk space is allocated by a Snapshot copy for volumes and aggregates
  • Schedule Snapshot copies
  • Configure and manage the Snapshot reserve
Module 18 SnapRestore Software
  • Explain how SnapRestore® technology works with SnapShot® copies
  • Describe what SnapRestore software can revert or restore
  • Revert and restore volumes and files using SnapRestore software
  • Explain how SnapRestore software works with SnapMirror® software
  • Describe the effects of using SnapRestore software on backup operations
Module 19 SnapVault
  • Describe SnapVault® components and benefits
  • Configure SnapVault on primary and secondary systems
  • Administer SnapVault on primary and secondary systems
  • Describe the application-consistent backup feature available in Data ONTAP® 7-Mode
  • Restore data from secondary to primary systems
Module 20 Open Systems SnapVault
  • Describe how Open Systems SnapVault® integrates with Data ONTAP® SnapVault
  • List Open Systems SnapVault advanced features
  • Configure and administer Open Systems SnapVault
  • Perform Open Systems SnapVault backup and restore operations
  • Troubleshoot and resolve Open Systems SnapVault transfer failures
Module 21 High-Availability
  • Define the high-availability controller configuration
  • Describe the three modes of high-availability operation with a high-availability pair
  • Analyze the effect on client protocols during failover and giveback operations
Module 22 MetroCluster
  • Describe a stretch MetroCluster environment
  • List the basic steps to implement a stretch MetroCluster
  • Describe a fabric-attached MetroCluster environment
  • List the basic steps to implement a fabric-attached MetroCluster
Module 23 SnapMirror
  • Explain the SnapMirror® Async, Sync, and Semi-Sync modes of operation
  • Describe how volume SnapMirror and qtree SnapMirror replicate data
  • Configure SnapMirror
  • Perform advanced SnapMirror operations
  • Explain SnapMirror performance impact
Module 24 Performance
  • Use Data ONTAP® tools to identify networking, disk I/O, FC loop saturation, and CPU bottlenecks using sysstat, stats, perfstat
  • Discuss how increasing utilization can affect performance
  • Use the reallocate command to maintain performance
  • Use recommended techniques to optimize Data ONTAP configuration for SAN and NAS
Lab Exercises

Lab 1-1 Identify the exercise environment
Lab 1-2 Log in to the exercise environment
Lab 1-3 Install NetApp System Manager
Lab 1-4 Allow NetApp System Manager access through Windows firewall
Lab 2-1 Identify the exercise environment
Lab 2-2 Log in to your assigned storage system
Lab 2-3 Log in to NetApp System Manager and add your storage system
Lab 3-1 License and configure the NFS service
Lab 3-2 Add an administration host using the setup command
Lab 4-1 Mount the root volume of the storage system on an administration host
Lab 4-2 Export a volume using the command-line interface
Lab 4-3 Rename a volume and verify the automatic export
Lab 4-4 Export and mount a qtree
Lab 4-5 Export to a subnet
Lab 4-6 Export to a netgroup
Lab 4-7 Export a qtree using NetApp System Manager
Lab 4-8 Mount an export from an admin host
Lab 5-1 Identify the exercise environment
Lab 6-1 Configure a storage system for a Windows Workgroup environment
Lab 6-2 Review the results of CIFS setup in a Windows Workgroup environment
Lab 7-1 View current shares
Lab 7-2 Create a new share using the command-line interface
Lab 7-3 Verify share access and display session information
Lab 8-1 Add a new local user account and configure user access
Lab 8-2 Access a network drive and work with access control
Lab 8-3 Create a local group
Lab 9-1 Terminate CIFS services using NetApp System Manager
Lab 9-2 Configure DNS with NetApp System Manager
Lab 9-3 Configure time services with NetApp System Manager
Lab 9-4 Reconfigure the CIFS services using NetApp System Manager
Lab 9-5 Create a 32-bit aggregate using NetApp System Manager
Lab 9-6 Create a volume using NetApp System Manager
Lab 9-7 Create shares and manage the permissions of the shares
Lab 9-8 Create a domain user
Lab 9-9 Create a share with computer management
Lab 9-10 Map shares to drive letters
Lab 9-11 Display CIFS sessions
Lab 10-1 Configure your storage system for multiprotocol access
Lab 12-1 Identify the components of your SAN exercise environment
Lab 14-1 Configure iSCSI on a storage system
Lab 14-2 Configure Windows for MPIO
Lab 14-3 Install the NetApp DSM for Windows
Lab 14-4 Install the NetApp host utilities for Window
Lab 14-5 Configure iSCSI on Windows
Lab 14-6 Confirm an iSCSI session on a storage system
Lab 14-7 Configure a second iSCSI session on Windows
Lab 14-8 Confirm the second iSCSI session on a storage system
Lab 14-9 Install host utilities on Red Hat Linux
Lab 14-10 Install the iSCSI software initiator for Red Hat Linux
Lab 14-11 Configure the iSCSI software initiator on Red Hat Linux
Lab 14-12 Confirm an iSCSI session or iSCSI sessions on a storage system
Lab 15-1 Create a LUN using commands
Lab 15-2 Initialize a LUN with disk management
Lab 15-3 Provision a LUN with disk management
Lab 15-4 Make the mounting of a LUN persistent
Lab 15-5 Create iSCSI-attached LUNS for Red Hat Linux
Lab 15-6 Discover iSCSI-accessible LUNs from Red Hat Linux
Lab 15-7 Prepare an individual LUN and mount it on Red Hat Linux
Lab 16-1 Identify the exercise environment
Lab 17-1 Create a Snapshot copy using NetApp System Manager
Lab 17-2 Restore a Windows file from a Snapshot copy
Lab 17-3 Restore a Unix or Linux file from a Snapshot copy
Lab 17-4 Manage Snapshot copies using NetApp System Manager
Lab 17-5 Create a FlexClone clone using the command-line interface
Lab 18-1 License and configure the SnapRestore software
Lab 18-2 Restore a volume using SnapRestore technology
Lab 18-3 Restore a file using SnapRestore technology
Lab 19-1 Identify primary and secondary systems
Lab 19-2 Configure SnapVault on the primary system
Lab 19-3 Configure SnapVault on the secondary system
Lab 19-4 Initialize the transfer
Lab 19-5 Perform a restore
Lab 19-6 Restart the backup relationship
Lab 20-1 Install Open Systems SnapVault for Windows server
Lab 20-2 Configure the SnapVault secondary system
Lab 20-3 Configure Windows Server 2008 R2’s firewall for Open Systems SnapVault
Lab 20-4 Establish the Open Systems SnapVault baseline
Lab 20-5 Perform a restore and resume SnapVault operations
Lab 21-1 License and configure controller failover
Lab 21-2 Perform a controller failover
Lab 21-3 Perform a controller giveback
Lab 23-1 Identify the source and destination systems
Lab 23-2 Set up SnapMirror on the source storage system
Lab 23-3 Set up SnapMirror on the destination storage system
Lab 23-4 Initiate a baseline transfer and schedule updates
Lab 23-5 Break the SnapMirror relationship
Lab 23-6 Resynchronizing the relationship
Lab 23-7 Reinstate the original SnapMirror relationship
Lab 23-8 Configure synchronous SnapMirror

Utbildningen levereras i samarbete med

Kurs-ID: FL-NCDABC
Längd: 10 dagar
Pris exkl moms: 89 000 kr

Frågor om kursen!?

Har du frågor om kursens innehåll, leveransdatum/ort eller behöver en företagsanpassad variant? Fyll i formuläret nedan!


Kan betalas med:
TRAINING CARD

Avtalsrabatter och kampanjer kan ej nyttjas på denna kurs.


Ort och datum

Stockholm
31 okt –
Boka nu!

Tipsa